All Products

Knife Jig

TO-SVM-45

Knife Jig TO-SVM-45

[tab name="Overview"]

For most knives. Width 45 mm (1¾"). Long knives need to be stiff. Min. blade length 60 mm (2 3/8"). Also for carver's draw knives. The jig rests freely on the Universal Support so you can follow the curve of the blade.

[tab name="Technical Specs"]

SVM-45 design The jig for knife sharpening comprises an adjustable clamp (1) for holding knives of any thickness and an adjustable stop (2). You adjust the jig to the knife thickness with the screw (3) and lock by tightening the knob (4). The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support. The Universal Support is normally placed vertically for knife sharpening towards the edge. Short knives can also be ground away from the edge with the Universal Support placed horizontally.

[tab name="Videos"]

[endtab]

C$50 In stock
Brand:Tormek Sharpening
The Bear Necessities Suitable for sharpening of all kinds of knives; household knives, chef’s knives, handicraft knives and knives for hunting and fishing. You can also sharpen carver’s draw knives. (0) Since the jig rests freely on the Universal Support you can follow the curve of the blade. (0)
Knife Jig
Maple leaf Your Exclusive Canadian Distributor
Secured By PayPal