Multi Jig

TO-SVS-50

Multi Jig TO-SVS-50

[tab name="Overview"]

For an exact replication of the shape on turning skew chisels with a straight or curved edge. Thanks to a unique design the jig also copes with oval section skews. Also for parting and beading tools and roughing gouges. Straight carving gouges up to 50 mm (2") wide. Max width of skews 32 mm (1½").

[tab name="Technical Specs"]

This patented jig consists of a housing (1) and two interchangeable seats — one closed, (2) and one open, (3). The seats can swivel and be locked with the screw (6) at any skew angle between 0° and 45°. Skew chisels have symmetrical bevels on both sides. With this jig you mount the tool only once for grinding both the bevels. By turning the jig upside down you can grind both of the bevels symmetrically.

SVS-50 Closed seat
The closed seat is for skew chisels. The tool is fixed with the side screw (4). The top screw (5) is not used.
SVS-50 Open seat
The open seat is designed for tools which have the edge square across the shank. The tool is fixed with the top screw in the housing (5). As the seat can be turned, it can also be used for short skew chisels.

[tab name="Videos"]

[endtab]

C$86 In stock
Brand:Tormek Sharpening
The Bear Necessities It is not without reason this is named the "Multi Jig". It consists of a housing and two interchangeable seats for different types of tools, the open seat and the closed seat. (0) With SVS-50 you can sharpen square and skew turning chisels with straight or curved edges as well as parting tools, roughing gouges and gouges and chisels for woodcarving. (0)
Multi Jig